Scott DA-20 Display Aerator 1/3 hp

Have a small pond (3/4-acre or less) that's begging for a beautiful, serene-sounding water feature? The 1/3-hp DA-20 Display Aerator was made for you.

Free shipping in continental US.

This is a new Scott product, with a 1/3-hp motor that keeps small ponds interesting to look at, pleasant to listen to, oxygenated and insect-free. Moving 300 gallons of water per minute in a cascading, trumpet-shaped spray, it sweeps algae from the surface, keeps water clean and clear, repels pesky insects, and helps keep fish healthy, muck broken up and your pond bottom clean.

The adjustable spray pattern of  the 1/3-hp model measures approximately 5 feet tall and from 9 to 18 feet wide. Larger patterns with higher flow rates are available by upgrading in motor size.

The DA-20 features a stainless-steel, oil-free, submersible motor, making it the most environmentally friendly water aerator on the market. And, with no oil to add or change and no control box required, it's maintenance-free! The DA-20 is even easy to install, requiring just two anchoring ropes and weights or tethers.

Perhaps best of all, the DA-20 is engineered to be left in the water year-round. You'll never need to remove it in fall or re-install in the spring. Simply shut the DA-20 off, allow it to freeze in and forget about it until the thaw. Freezing water does no damage to the DA-20, even in the harshest winter.

Proudly manufactured in the USA, the DA-20 carries an unconditional, 5-year motor warranty. This unit is produced with 70 feet of submersible, 12-gauge power cable. Longer lengths are available, and special orders are never a problem. You can add a two or four light set. You can order and add it now or at a later time.

Designed for fresh and salt water. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages.

GFCI required. Please disconnect power source when swimmers are present.

• 32″ minimum pond depth required.
• Motor specs: 60 Hz, single-phase, 8 amps, 670 watts, 3450 RPM

Proudly made in the USA.